AT FCG2 Foot Crank Generator and Power Supply

AT FCG2 Foot Crank Generator and Power Supply

The foot crank generator is used for supplying AC power in remote locations for portable communication/electronics equipment. The system is supplied with a generator unit, 12V DC Storage battery, DC to AC invertor and interface cables with a bicycle support mechanism.

 Technical Performance

 

Generator Specification
Output Power	120Watt
Output Voltage	15V
Output Current	8A
Invertor Specifications
DC Output	9.5 – 13.5 V DC
AC Output	210-230V AC
Max output power	100Watts
Storage Battery	12V 12AH
General Specifications
Generator Dimensions	170mm x 143mm x 96mm
Bicycle Support Frame Dimensions	600 x 460 x 150 (folded)
Generator Weight	4.5Kg
Bicycle Support Frame Weight	8Kg
Invertor Weight	5Kg
Safety Mechanism	Over current and over voltage protection
Bicycle Frame max load capacity	100Kgs

 Simple Operational Setup

1. Assemble Bicycle Support frame
2. Affix Generator and Inverter to mounting points
3. Attach pedals to cranking arms
4. Position unit on firm base
5. Connect Interface cable to battery terminals
6. Apply consistent pressure to both pedals at approx 60rpm